Specifications
|
Description
|
Standards
|
IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1D, 802.1p, 802.11e, 802.11w (Rapid Spanning Tree) 802.1X (security authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)
|
Ports
|
LAN, WAN
|
Switch
|
Power button (on/off)
|
Buttons
|
Reset
|
Cabling Type
|
Category 5e or better
|
LEDs
|
Power, WPS, WAN, wireless, LAN (ports 1-4), Additional LEDs for multifunction router, access point, bridge on RV180W
|
Operating System
|
Linux
|
Network
|
Network Protocols
|
- Dynamic Host Configuration Protocol (DHCP) server
|
- Point-to-Point Protocol over Ethernet (PPPoE)
|
- Point-to-Point Tunneling Protocol (PPTP)
|
- Layer 2 Tunneling Protocol (L2TP)
|
- DNS proxy
|
- DHCP relay agent
|
- IGMP proxy and multicast forwarding
|
- Rapid Spanning Tree Protocol (RSTP)
|
- Network Address Translation (NAT), Port Address Translation (PAT)
|
- One-to-One NAT
|
- Port management
|
- Port mirroring
|
- Software configurable DMZ to any LAN IP address
|
- Session Initiation Protocol (SIP) Application Layer Gateways (ALG)
|
LAN
|
- Four (4) 10/100/1000 Mbps Gigabit LAN ports with managed switch
|
WAN
|
- One (1) 10/100/1000 Mbps Gigabit WAN port
|
WLAN
|
- Built-in high-speed 802.11n wireless access point
|
Routing Protocols
|
- Static routing
|
- Dynamic routing
|
- RIP v1 and v2
|
- Inter-VLAN routing
|
Network Address Translation (NAT)
|
Port Address Translation (PAT), Network Address Port Translation (NAPT) protocol
|
VLAN Support
|
Port-based and 802.1Q tag-based VLANs
|
Number of VLANs
|
4 active VLANs (3-4096 range)
|
IPv6
|
- Dual-stack IPv4 and IPv6
|
- 6to4 tunneling
|
- Multicast Listener Discovery (MLD) for IPv6 (RFC2710)
|
- Stateless address auto-configuration
|
- DHCPv6 Server for IPv6 Clients on LAN
|
- DHCP v6 client for WAN connectivity
|
- Internet Control Message Protocol (ICMP) v6
|
- Static IPv6 Routing
|
- Dynamic IPv6 Routing with RIPng
|
Network Edge (DMZ)
|
Software configurable to any LAN IP address
|
Layer 2
|
802.1Q-based VLANS, 4 active VLANS
|
Security
|
Firewall
|
Stateful packet inspection (SPI) firewall, port forwarding and triggering, denial-of-service (DoS) prevention, software-based DMZ
|
DoS Attacks Prevented:
|
SYN Flood Detect Rate (max/sec)
|
Echo Storm (ping pkts/sec)
|
ICMP Flood (ICMP pkts/sec)
|
Block UDP Flood
|
Block TCP Flood
|
Block Java, Cookies, Active-C, HTTP Proxy
|
Access Control
|
IP access control lists; MAC-based wireless access control
|
Content Filtering
|
Static URL blocking or keyword blocking
|
Secure Management
|
HTTPS, username/password complexity
|
WPS
|
Wi-Fi Protected Setup
|
Certificate Management
|
Self-signed SSL certificate, import/export certificate using Privacy-Enhanced Mail (PEM) format
|
User Privileges
|
2 levels of access: admin and guest
|
VPN
|
IPsec VPN
|
10 gateway-to-gateway IPSec tunnels
|
QuickVPN
|
10 Quick VPN tunnels using Cisco QuickVPN client
|
PPTP VPN
|
10 PPTP tunnels for remote client access
|
Encryption
|
Triple Data Encryption Standard (3DES)
|
Authentication
|
MD5/SHA1
|
VPN Pass-through
|
IPsec/PPTP/Layer 2 Tunneling Protocol (L2TP) pass-through
|
Quality of Service
|
QoS
|
- 802.1p port-based priority on LAN port, application-based priority on WAN port
|
- 4 queues
|
- Differentiated Services Code Point support (DSCP)
|
- Class of Service (CoS)
|
- Bandwidth Management for service prioritization
|
Jumbo Frame
|
Supports Jumbo Frame on Gigabit ports - at least 1536B
|
Performance
|
NAT Throughput
|
800 Mbps
|
Concurrent Sessions
|
12,000
|
IPsec VPN Throughput
(3DES/AES)
|
50 Mbps
|
Configuration
|
Web User Interface
|
Simple, browser-based configuration (HTTP/HTTPS)
|
Management
|
Management Protocols
|
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour, Universal Plug and Play (UPnP)
|
Event Logging
|
Local, syslog, email alerts
|
Network Diagnostics
|
Ping, Traceroute, and DNS Lookup
|
Upgradability
|
Firmware upgradable through web browser, imported/exported configuration file
|
System Time
|
Supports NTP, Day Light Savings, Manual entry
|
Languages
|
GUI supports English, French, Italian, German, Spanish, and Japanese
|
Wireless
|
Radio and modulation type
|
802.11b: direct sequence spread spectrum (DSSS), 802.11g: orthogonal frequency division multiplexing (OFDM), 802.11n: OFDM
|
WLAN
|
2.4GHz IEEE 802.11n standard-based access point with 802.11b/g compatibility
|
Operating channels
|
11 North America, 13 most of Europe, auto channels selection
|
Wireless isolation
|
Wireless isolation between clients
|
External antennas
|
2 fixed antennas
|
Antenna gain in dBi
|
1.8 dBi
|
Transmit power
|
802.11b: 17 dBm +/- 1.5 dBm; 802.11g: 15 dBm +/- 1.5 dBm; 802.11n: 12.5 dBm +/- 1.5 dBm
|
Receiver sensitivity
|
-87 dBm at 11 Mbps, -71 dBm at 54 Mbps, -68 dBm at mcs15, HT20, -66 dBm at mcs15, HT40
|
Radio Frequency
|
Single-band, works on 2.4GHz
|
Wireless Domain Service (WDS)
|
Allows wireless signals to be repeated by up to 3 compatible devices
|
Operating Modes
|
Multifunction device-wireless router, access point mode with WDS, Point-to-Point Bridge mode with WDS, Point-Multi Point Bridge mode with WDS, Repeater mode with WDS
|
Active WLAN clients
|
Recommended 10 concurrent client (max 16) in wireless router mode; and 20 concurrent client (max32) in wireless Access Point mode
|
Multiple SSIDs
|
Supports multiple Service Set Identifiers (SSIDs), up to 4 separate virtual networks
|
Wireless VLAN map
|
Supports SSID to VLAN mapping with wireless client isolation
|
WLAN security
|
Wired Equivalent Privacy (WEP), WPA, WPA2-PSK, WPA2-ENT, 802.11i
|
Wi-Fi Multimedia (WMM)
|
WMM with QoS (802.1e), WMM power save (WMM-PS)
|
Environmental
|
Power
|
12V 1A
|
Certifications
|
FCC class B, CE, IC, Wi-Fi
|